2 Todos os computadores
9 Escolha com vários critérios
13 Envio
17 Agente
18 Revision
19 Versão do software
20 Software
23 Computador
24 Usuário
25 Sistema Operacional
26 Memória
27 Velocidade de Memória (MHz)
28 Número da Máquina
30 Procurar
31 Escolha um parâmetro
32 Escolha
33 Domínio
34 Endereço IP
35 Nome do computador
36 BIOS N. de série
37 Ordem
38 Ordem de entrega
39 Origem
40 Código
41 Limpar
42 Nenhum resultado
43 Menu Principal
45 Espaço livre
46 Último inventário
48 Detalhes do Computador
49 Nome
50 Swap
51 Comentários
52 Licença
53 Descrição
54 Processador(es)
55 Número
56 Dados Administrativos
61 Placa de Vídeo
62 Resolução
63 Armazenamento
64 Fabricante
65 Modelo
66 Tipo
67 Tamanho do disco
69 Editor
70 Designação
79 Impressora(s)
80 Nome
81 Status
82 Rede(s)
83 Capacidade
84 Interface
85 Unidade
86 Sistema de arquivos
87 Total
88 Livre
90 Resultado
91 Dispositivos de entrada
92 HD(s)
93 Controladora(s)
94 Número do Slot
95 Endereço MAC
96 Som
97 Monitor(es)
103 Atualizar
107 Configurações
108 Solicitações de registro
111 Número de licença do Windows
113 Cancela
114 Grava
115 Atualiza
116 Adicione
119 Você realmente quer apagar
122 Apaga
129 COMO
130 DIFERENTE
134 Adicione novo arquivo na base
135 Cuidado, você irá deletar este arquivo permanentemente !!!
137 Arquivo
140 Super administradores
141 Administradores
142 Administradores locais
143 teledeploy requesters
162 Apague a seleção
168 Este formato de arquivo é inválido (deve ser um .zip, .pl ou binário UNIX)
170 O mesmo arquivo já existe !!!
171 Arquivo apagado
172 Um erro aconteceu. O arquivo
173 não foi adicionado à base.
174 Descobrir IPs
175 Duplicados
176 IPS
177 Reúne computadores redundantes
178 Etiqueta/Número de divisões de PC’s
180 Usuário não registrado
182 Computadores que contém um determinado TAG
183 Download
184 Este arquivo não contem "use Versão constante"
185 Versão deve ser maior que 1
186 Este arquivo não contem o arquivo .ver
187 Este arquivo, não é um arquivo zipado válido
188 Volta
189 Você deve selecionar pelo menos 2 computadores
190 infoconta:
191 apagado
192 Sumário de Redundância
193 Hostname + N. Serial
194 Hostname + Endereço MAC
195 Endereço MAC + N. Serial
196 Somente Hostname
197 Somente Serial
198 Somente Endereço MAC
199 Redundância
200 Relay correspondente diminuído
201 MENOR
202 MAIOR
203 ENTRE
204 FORA DE
205 Habilitado
206 salvo por
207 Gateway
208 máscara
209 Versão da BIOS
210 Data de BIOS
211 Registro
212 Nome da chave
213 Valor da chave
214 Imprime essa página
215 Mostra todos
216 Erro de usuário ou senha
217 Senha
218 Versões de agentes
219 IP’s desconhecidos
220 apagado
221 Computadores coletados pelo IP
222 Atenção !!! Todos os computadores selecionados serão reunidos num único computador! Tem certeza?
223 Informação
224 Valor
225 Informação administrativa
226 foi deletado com sucesso da tabela infoconta
227 Tem certeza que quer apagar a coluna
228 Entre com a nova informação administrativa
229 Texto(255)
230 Número inteiro
231 Número Real
232 Data
233 Data atual
234 foi inserido com sucesso
235 Usuários
236 Muda senha
237 Nova senha
238 Confirmação
239 Você deve preencher todos os campos
240 Sua senha não confere
241 Sua senha foi modificada com sucesso
242 Administrador
243 Usuário
244 Adicione novo Usuário
245 foi apagado com sucesso
246 Tem certeza que quer apagar o Usuário?
247 Usuário do Mysql
248 Senha do Usuário do Mysql
249 Não foi possível conectar-se ao Mysql. Por favor entre com um Usuário/senha válidos.
250 Hostname do servidor Mysql
251 Sair
252 Nome (você escolhe)
253 Registro "hive"
254 Caminho da chave (Ex: SOFTWARE Mozilla)
255 Nome da chave que ser lida (* para todos)
256 Escolha
257 Nome da chave do registro
258 Valor da chave do registro
259 Erro, o dado não pode ser inserido (Caracteres especiais não são permitidos)
260 Descrição modificada com sucesso
261 Descrição apagada
262 Digite uma Descrição
263 Configuração do arquivo de descrição
264 Nenhum arquivo "descrição" agora
265 Nada
266 Data inválida
267 dd/mm/aaaa
268 Velocidade
269 %d/%m/%Y %H:%i
270 Modem(s)
271 Slot(s)
272 Porta(s)
273 BIOS
274 Nome do Sistema Operacional
275 Versão do SO
276 Chipset
277 Versão
278 Driver
279 Porta
280 Tipo da MIB
281 DHCP IP
282 Gateways
283 Propósito
284 Fabricante da BIOS
285 Selecione um parâmetro a ser modificado
286 Service pack
287 Importar
288 Importar arquivo
289 Informações da rede
290 Busca por IP
291 Modo expert
292 Adicionar/Remover um equipamento de rede
293 Tipos de equipamento de rede
294 Nome das sub-redes
295 Localização
296 Uid
297 Não pode escrever no diretório
298 Todos os campos devem ser preenchidos
299 Endereço IP inválido (deve ser: x.x.x.x)
300 Máscara de rede inválida: deve ser: x.x.x.x
301 Rede adicionada
302 Rede apagada
303 Adicionar uma sub-rede
304 Nome da rede
305 Uid
306 Lista de sub-redes
307 Adicionar um tipo
308 Nome do tipo
309 Tipos de equipamento de rede
310 Descobrir IPs menor que
311 Hosts
312 Descoberta de IPs
313 Computadores gateway
314 Computadores gateway para descoberta de IPs
315 Nenhum computador cadastrado no inventário
316 Sub-rede
317 ANALIZAR
318 Nome DNS
319 Resultado da análise da rede
320 Esta análise já foi feita em
321 Você deseja ver os dados em cache?
322 Data do cache
323 gerado em
324 HOST AVALIADO COMO
325 Vazio
326 nenhuma máscara
327 Detalhes do computador
328 Atingido
329 Cadastrado no inventário
330 Nome NetBIOS
331 Endereço da rede
332 Por favor aguarde...
333 Adicionar um novo dispositivo de rede
334 Lista de equipamentos de rede
335 Tipo de equipamento
336 Descrição do equipamento
337 O PROGRAMA NÃO ENVIOU NADA
338 Modo limitado
339 Você precisa do arquivo ipdiscover-util.pl (somente no Linux) para usar o modo expert
340 Exibir
341 Não foi possível inicializar, você deve configurar os direitos de execução
342 Você deve configurar permissões de escrita no diretório raiz
344 Erro
345 ESTA ANALISE JÁ SE ENCONTRA EM EXECUÇÃO, POR FAVOR TENTE NOVAMENTE MAIS TARDE
346 ANTES
347 DEPOIS
348 Usuário Windows
349 Adicionar coluna
350 Tipo de CPU
351 Número de CPU(s)
352 Última coleta
353 Qualidade
354 Fidelidade de coletas
355 Empresa
356 Dono
357 Versão do agente OCS NG
358 Coringas: ? (um caractere), * (vários caracteres)
359 Serial do Monitor
360 Fabricado em (semana/ano)
362 A rede
363 Já existe
364 Cadastrados no inventário
365 Não cadastrados no inventário
366 Identificado
367 Equipamento da rede
368 da rede
369 Enviado por
370 Distribuição
371 Todos os componentes
372 Escolha os componentes
373 Usuário registrado
374 Sociedade registrada
375 Versão do agente OCS NG
376 Computador indisponível. Por favor tente novamente em alguns instantes.
377 Velocidade do processador (MHz)
380 Dicionário
381 Número
382 Nome do software
383 A página
384 Mover tudo
385 para uma nova categoria
386 OU
387 para uma categoria existente
388 Categoria
389 Nada
390 Categorias de dicionário
391 Nome da categoria
393 Buscar
394 Buscar categoria
395 Buscar software em qualquer lugar
396 Aplicar
397 Ir para a categoria
398 Lista de categorias
410 EXATAMENTE
411 Campos devem conter apenas Números
412 Coleta de chaves do registro
413 Atualização automática
414 Configuração/distribuição automática
415 Deletamento automático dos logs (utilizado pela GLPI).
416 Registro (log) das atividades
417 Distribuição automática de software
418 Diferenciação automática de inventários
419 Número máximo de dias para um computador do inventário ser atualizado
420 Distribuição automática de software: Consulte a documentação.
421 Distribuição automática de software: Consulte a documentação.
422 Distribuição automática de software: Consulte a documentação.
423 Distribuição automática de software: Consulte a documentação.(Não será feito download de pacotes com uma prioridade igual ou maior).
424 Validez de um pacote como de sua consideração pelo agente.
425 Número máximo de computadores por gateway consultando ips na rede
426 Validez dos inventários. (SEMPRE: inventário em cada início de uma sessão. NUNCA: nenhum inventário)
427 Define critérios que devem ser iguais para que dois computadores se agrupem automaticamente.
428 Configurar
429 Freqüência
430 Processamento massivo
431 Ativar
432 Não identificado
433 Alterar
434 Construtor de pacotes
435 Construir novo pacote
436 Não podem abrir o arquivo
437 O pacote for criado com êxito no diretório
438 Construir novo pacote
439 Protocolo
440 Prioridade
441 Algoritmo Digest
442 Codificação Digest
443 Ação
444 Comando
445 Caminho
446 Nome do arquivo
447 Notificação do Usuário
448 Alertar Usuários
449 Texto
450 Contador
451 Usuário pode abortar
452 Usuário pode adiar
453 Foi necessário Intervenção do Usuário para concluir a operação
454 NÃO
455 SIM
456 Executar
457 Armazenar
458 Lançar
459 Contador deve ser um Número
460 Identificador único
461 Sumário
462 Tamanho total
463 Tamanho das partes (1 KB min)
464 Número das partes
465 Ativação de pacote
466 ATENÇÃO: Não foi possível encontrar o arquivo de informações em
467 ATENÇÃO: Não foi possível encontrar partes do arquivo em
468 Você tem certeza que deseja ativar este pacote
469 Pacote ativado, pode ser afetado agora
470 Https url
471 Partes da url
472 ERRO: Não podem escrever no diretório
473 Timestamp deve ser um Número
474 Timestamp deve ser um Número de 10 dígitos
475 Timestamp
476 Ou ativar um pacote manualmente
477 Afetar um pacote
478 Computador(es)
479 Nenhum computador selecionado
480 partes
481 Pacotes ativos
482 AGUARDANDO NOTIFICAÇÃO
483 Validação com SUCESSO
484 Freqüência configurada
485 Sempre inventariado
486 Nunca inventariado
487 Personalizado
488 Padrão
489 Comportamento da descoberta de IPs
490 Nunca descobrir os IPs
491 SEMPRE descobrir os IPs da rede
492 ELEITO Descoberta de IPs da rede
493 Padrão (pode ser eleito)
494 Configurar a freqüência das coletas
495 Sempre coletado
496 Dia(s)
497 Padrão, utiliza o parâmetro freqüência
498 Pacote
499 servidor
500 Personalização
501 adicionar pacote
502 Eleito
503 Forçar eleição
504 Não eleito
505 Elegível
506 Não elegível
507 CONTENDO
508 NÃO CONTENDO
509 NENHUM
510 Nenhum pacote
511 segundos
512 Configuração
513 Construir
514 Ativo
515 Desativado
516 KB
517 Esta opção só pode ser usada em um computador por vez
518 Forçar descoberta de IPs
519 Computador já eleito para a rede
520 Computador já FORÇOU descoberta de IPs para a rede
521 Computador já FORÇADO como não elegível
522 Computador
523 Desfazer e voltar para o estado padrão
524 NUNCA afetar novamente
525 Você TEM CERTEZA ?
526 NENHUM COMPUTADOR AFETADO
527 Janeiro
528 Fevereiro
529 Março
530 Abril
531 Maio
532 Junho
533 Julho
534 Agosto
535 Setembro
536 Outubro
537 Novembro
538 Dezembro
539 Domingo
540 Segunda
541 Terça
542 Quarta
543 Quinta
544 Sexta
545 Sábado
546 com status
547 tudo
548 Êxito SUSSESSO
549 Arquivo (distribuído nos computadores clientes)
550 Arquivo (não obrigatório, pode ser usado pelo comando 'executa')
551 Já existe um pacote com este nome
552 <i> Você deve fazer uma busca por computadores, e então clicar em 'configurar' para afetar estes pacotes ativos<br> Você pode também afetar um pacote em um único computador usando a aba 'customização' nos detalhes de qualquer computador</i>.
553 Chave do Windows
554 Monitor: Serial
555 Monitor: Fabricante
556 Monitor: Resolução
557 Usuário de Dominio
558 Pacotes afetados
559 Arquivo não é um .ocs
560 Ao servidor
561 Desconhecido (pacote deletado)
562 Redes com uid:
563 Fabricante
564 Freqüência da auto-execução do agente
565 Address usado para coletas locais
567 Latência da descoberta de IPs
568 RAM(MB)
569 CPU(MHz)
570 Ajuda
571 Valida tudo
572 Sucesso
573 Erros
574 Stats
575 Unaffect not notified
576 Descoberta de IP’s customizada
577 Nome do Grupo
580 Todos Computadores (replay)
581 Todos os Computadores (cached)
582 e
583 Grupos
584 Para a requisição
585 Para a Seleção
586 Novo Grupo
587 Novo grupo estático
588 Sobregravar Grupo
589 Adicionar a Grupo estático
590 Resetar estado
591 Incluir estaticamente
592 Excluir estaticamente
593 Data de criação
594 Cache gerado em
595 GRUPO ESTÁTICO
596 INCLUIDO DINAMICAMENTE
597 EXCLUIDO ESTATICAMENTE
598 Incluir
600 Excluir
601 Afetação de Massa
602 Você precisa enviar o arquivo
603 Nenhum Computador encontrado, verifique o arquivo
604 computador(es) Afetado(s) com Sucesso
605 computador(es) Mal-sucedido
606 Arquivo de Computadores
607 Grupo
608 criado
609 sobregravado
610 ESTATICAMENTE INCLUIDO
611 NO CACHE
612 ESTATICO
613 DINAMICO
614 EXCLUIDO
615 Pesquisa
616 Perímetro do Usuário
617 Novo
618 Perímetro
619 Usuário Local
620 Nenhum computador nesse perímetro.
621 O Grupo não foi criado, este grupo já existe
622 Cached
623 A informação que você está tentado acessar não existe
624 Realmente deseja excluir este grupo?
625 Ativar esta afecção
626 Desativar esta afecção
627 Pelo menos um dos campos está vazio... Não houve mudanças.
628 Servidores
629 Novo Grupo de servidores de redistribuição
630 Um grupo de servidores já existente
631 Adicionar em
632 Minimizar
633 Grupo de servidores de Gestão
634 Ação desejada
635 Novo nome
637 Substituir
638 O NOME DO GRUPO(S) NÃO PODEM SER NULOS
639 TESTE GRUPO DE SERVIDORES NÃO EXISTE
640 Deseja realmente apagar
641 Grupo de servidores de Redistribuição
642 o grupo
643 todas as máquinas
644 esta máquina
645 DETALHE DO GRUPO
646 URL
647 NUMERO DA PORTA
648 COMPARTIMENTO DE REPERTÓRIO
649 AUTOMÁTICA
650 MANUAL
651 Grupo de Servidores
652 Máquina(s)
653 Lista negra de endereços (MAC)
654 Entre com um novo endereço para a lista negra de (MAC)
655 Inserção feita
656 Este dado já existe na lista
657 Campos em vermelho com ERRO!!! (Espaços Vazios ou tamanho < 2)
658 máquina não tem um servidor de redistribuição. <br> É necessário para a afecção de pacotes manualmente.
659 Máquinas já possuem este pacote teleimplantado. Este pacote de status dessas máquinas é agora
660 GRUPO DE SERVIDORES NÃO EXISTE
661 PACOTES PARA SERVIDORES DE REDISTRIBUIÇÃO
662 Regras de afectação
663 PROBLEMAS INTERNOS
664 Ação realizada
665 NENHUMA MÁQUINA FOI SELECIONADA. GRUPO DE SERVIDOR NÃO CRIADO
666 Grupo de servidores criados
667 PARA O PACOTE
668 afetar com que regra?
669 ATENÇÃO: existem dobrões de prioridade <br> A única regra será mantida!
670 A regra já contém este nome
672 Esta regra não existe!
673 Administração das regras de afectação
674 NOME DA REGRA
675 PRIORIDADE
676 VALOR MÁQUINA
677 OPERADOR
678 VALOR SERVIDOR
679 NOME
680 DOMINIO
681 USUÁRIO
682 Para adicionar uma condição suplementar
683 Validar a regra
684 Os campos a seguir devem ser apreendidos
685 Adicionar a regra
686 A condição
687 Você não pode apagar isto!
688 Pacotes são afetados neste grupo!
689 Pacotes são afetados neste servidor!
690 Você nçao pode apagar todas as máquinas
691 Valores Genéricos: $IP$ e $NAME$
692 Você irá modificar TODOS os valores dos servidores
693 Você irá modificar TODOS os valores dos seguintes servidores
694 para encontrar o valor padrão, valide os campos nulos
695 Você irá modificar o grupo de servidores
696 mostrar pacotes ativado para afetar
697 a máquina
698 o grupo de servidores
699 Tem certeza de querer afectar este pacote nessas máquinas?
700 Escolhas de Lista Negras
701 Lista Negra de números seriais
702 Adicionar um novo  número serial para a Lista Negra
703 Lista Negra
704 Está certo que deseja uma adicionar a uma lista negra
705 Está certo que deseja remover de uma lista negra
706 Removido da Lista Negra
707 este número de série
708 este endereço MAC
709 Customizado PROLOG_FREQ
710 Customizado download
711 Tomadas em modificações de contas
712 Arquivo de dicionário
713 Está certo que deseja substituir este dicionário
714 Dicionário de referencia
715 Escolha um dicionário para modificar
716 Atualize o arquivo de dicionário
717 customizado
718 Ignore
719 (por segundo)
720 Tempo de espera entre 2 ciclos de implantação
721 Tempo de espera entre 2 ciclos de download
722 Tempo de espera entre 2 ciclos de implantação
723 Prioridade máxima de <br> pacotes baixados (os pacotes de prioridade superior são ignorados)
724 Tempo de contato entre 2 entre o agente e o servidor
725 (na hora)
726 URL do servidor de redistribuição (IP $ e $ NAME são os valores genéricos)
727 Diretório de destino dos pacotes.
728 Inventário
729 computadores
730 horas
731 Recurso nomeados na base de cada seção de inventário.
732 milissegundo(s)
733 Inativo
734 Arquivo de Inventário
735 Filtros
736 Permitem que o computador de grupos de recurso
737 número aleatório computados no intervalo definido. Projetado para evitar a computação de muitos grupos no mesmo processo
738 Especificar a validade de grupos computador (padrão: calculá-lo uma vez por dia - veja o offset)
740 Validade do bloqueio de um computador
741Configure automação para atualização do inventário sobre a CHECKSUM valor (agente de carga inferior registrado DB)
742 Faça a automação considerar um inventário como uma transação (menor concorrencia, melhor uso de disco)
743 Configurar a automação para fazer uma atualização diferencial de seções de inventário (nível de linha). Baixa carga DB registrado, maior carga de Interface do usuário
744 Aceitar um inventário somente se solicitado pelo servidor (Recusa inventário "forçado")
745 Especifique quando a automação irá limpar o cache da estrutura de inventário
746 Especifique a diferença mínima para substituir um agente descobridor de IP "ipdiscover"
747 Desativar o tempo antes de uma primeira eleição (não recomendado)
748 Habilitar grupos de descoberta de IP "ipdiscover"(por exemplo, você pode querer impedir que alguns grupos a serem agentes ipdiscover)
749 Use com injector-ocsinventory, permitir que as entidades multi recurso
750 Gerar arquivo compactado ou XML ou texto plano
751 Especifique se você deseja manter o traço de todo o inventário entre a sincronização com o servidor de nível superior
752 Caminho para o diretório de arquivos OCS (deve ser gravável (+w))
753 Ativar pilha de filtro PROLOG
754 Habilitar sistema de filtro principal para modificar algumas coisas "on the fly - na mosca"
755 Ativar filtro de população de inventário. Um endereço de IP dedicado, é permitido para o envio de um novo computador apenas uma vez neste período
756 Periodo definido por INVENTORY_FILTER_FLOOD_IP
757 Ativar pilha de filtro de inventário
758 Especifique se você deseja acompanhar pacotes afectados a um grupo no nível do computador
759 É necessário ser superior ou igual
760 Serviço WEB
761 Habilita/Desabilita o serviço SOAP
762 Resultado por tamanho (esteje ciente dos problemas de desempenho)
763 Incluir arquivos de seus próprios módulos
764 Opções a seguir não são configuráveis pelo GUI. <br> (edite manualmente ocsinventory-server.conf)
765 Todos os programas
766 SEM RESULTADO
767 CAUTELA: RESULTADO FILTRADO
768 Numero de gravações
769 Transferência feita
770 ATUALIZADO DE
771 Esta categoria já existe
772 O nome da categoria não pode ser nulo
773 Você deve selecionar o nome da categoria
774 Você está tentando fazer uma transferência da categoria para a mesma categoria (Impossível)
775 Diretório de criação de pacote
776 Diretório de participação em cache das análises de "ipdiscover"
777 Validade da Seção
778 Número de GRUPO DE TRABALHO diferente(s)
779 Diferente TAG
780 Diferente IPSUBNET
781 Máquinas tem um software implantação pendentes
782 Máquinas com um pacote de erro
783 Número diferente de  OS
784 Agente diferente
785 Processadores diferentes
786 Resoluções diferentes
787 Máquinas com um processador >=
788 Máquinas com um processador =<
789 Máquinas com um processador entre
790 Máquinas com memória RAM >=
791 Máquinas com memória RAM =<
792 Máquinas com memória RAM entre
793 Maquinas com base
794 Máquinas em atividade
795 Máquinas que conectaram ao servidor hoje
796 Numeros de máquinas inventáriadas hoje
797 Máquinas não vistas a mais de
798 ATIVIDADE
799 HARDWARE
800 SENÃO
801 Não mostre esse campo
802 Mostre esse campo
803 Conta em dias que a máquina já não se conecta com o servidor
804 Velocidade mínima de processador
805 Velocidade máxima de processador
806 Montante mínimo de RAM
807 Montante máximo de RAM
808 Repartição
809 GRUPOS ESTÁTICOS
810 GRUPOS DINAMICOS
811 Tem certeza de querer modificar a visibilidade do grupo
812 O software em 0 está presente no cache, mas não são mais resolvidos nas máquinas. <br> Eles não podem ser colocados em uma categoria do dicionário
813 Disco rígido com espaço restante >
814 Disco rígido com espaço restante <
815 Disco rígido com espaço restante entre
816 Disco rígido com espaço máximo restante
817 Disco rígido com espaço máximo restante
818 Get out of group
819 computer(s) added to group
820 Last contact
821 SERVER CONFIGURATION MODIFICATION
822 Customize
823 By default
824 Interface logs activation
825 Logs directory
826 Address to find teledeploy packages fragments to activate
827 Address to find teledeploy packages INFO files to activate
828 Remove computers with inventory older than
829 Redistribution packages creation directory
830 Ldap server address
831 Ldap server port
832 Ldap base name + dc
833 Field name to define login
834 Version LDAP_OPT_PROTOCOL_VERSION
835 Add RSX
836 Manage TYPES
837 You don't have access to this datas
838 Disk: Drive letter
839 Disk: Type
840 Disk: Format
841 Disk: Capacity
842 Disk: Free Space
843 Disk: Volume Name
844 Group: Id
845 Group: Static?
846 Softwares: company
847 Softwares: Name
848 Softwares: Version
849 Softwares: Install directory
850 Softwares: Comments
851 Bios: Computer manufacturer
852 Bios: Model
853 Bios: Serial number
854 Bios: Computer type
855 Bios: Manufacturer
856 Bios: Version
857 Bios: Date
858 Monitor: Manufacturer
859 Monitor: Name
860 Monitor: Description
861 Monitor: Type
862 Monitor: Serial number
863 Network: Description
864 Network: Type
865 Network: MibType
866 Network: Speed
867 Network: MAC Address
868 Network: Status
869 Network: IP Address
870 Network: IP Netmask
871 Network: Subnetwork IP
872 Network: Gateway IP
873 Network: DHCP IP
874 Registry key: Name
875 Registry key: Value
876 Simple unaffect REDISTRIBUTION GROUP
877 SOME COMPUTERS HAVEN'T BEEN ADDED TO GROUP BECAUSE:
878 Reminder: a computer can be a member of one server group only
879 GROUPE REPLACED
880 GROUP CREATED
881 Computers added
882 Computers deleted from group
883 Restrict view
884 WARNING: WITH FILTER visualisation
885 unknown
886 Simple desaffection
887 It's possible that this package is not affected to redistribution servers
888 Removal
889 Connected as
890 Interface is actually locked on a search with various criterias
891 Remove interface LOCK
892 connect with another account
893 NO TAG AFFECTEID TO YOUR PROFILE
894 NO RIGHTS LEVEL DEFINED TO YOUR PROFILE
895 TAG Modification
896 You do not have rights to access this page, please contact your administrator
898 Add an annotation
899 Writer
900 Do you really want to delete selection ?
901 Action sur le résultat de la requête
902 Action sur le résultat de la sélection
903 You must fill the explanation field
904 Package reassignment
905 Explanation about perfomed actions <br>on computer to be able to <br>affect packageuet
906 Package teledeploy removal
907 Explanation about package removal<br>on this computer
908 Mobile terminal informations
909 MODIFICATION NOT PERFOMAED: WRONG NEW PROFILE
910 Validate
911 Switch profile of
912 Export list of computers that have this softwares
913 Number of non inventoried network interfaces
914 Number of agents that didn't send inventory since at least
915 messages
916 The value must be higher than
917 FREQUENCY value
918 Differential between LASTDATE and LASTCOME
919 Are you sure to want to delete this message
920 ERROR, the requested doesn't exists.
921 Delete this category
922 To merge, you have to select 2 computers at least
923 You have no computer in count
924 EXTRACTION REQUEST NOT CONVENTIONAL!
925 FUSER functionality
926 Fuser login:
927 CACHE S NOT REGENERATED BY THIS ACTION
928 Logs visualization
929 subnetworks managementn is not performed locally.
930 Vo you cannot add/modify/remove subnetworks
931 Modify a subnetwork
932 The IP address field cannot be blank
933 The network name field cannot be blank
934 The netword ID field cannot be blank
935 The netmask address field cannot be blank
936 The type field cannot be blank
937 This type already exists
938 New type
939 Computers members of the group
940 All computers having this package
941 DISPLAYING STATISTICS ON
942 You have enter a commentary for this peripheral
943 You have to choose the peripheral type
944 Data entered by
945 Peripheral modification
946 New peripheral addition
947 Non identified peripherals list
948 Identified peripherals list
949 Computer Id
950 FILE NAME
951 FILE CREATED IN THE
952 FILE MODIFIED IN THE
953 SIZE
954 A SESSION loss happened
955 NO SYSTEM FOUND IN DATABASE
956 All the errors
957 All the SUCCESS
958 TELEDEPLOY VALUE PROBLEM
959 TO MUCH SOFTWARE PULLED UP. BE MORE SPECIFIC WITH THE SEARCH
960 NO SOFTWARE CORRESPONDING TO THE SEARCH
961 LIST OF
962 (one , between every)
963 DIFFERENT LIST OF
964 Partition name
965 Display
966 Agent
967 BELONG TO
968 DON'T BELONG TO
969 Packages history
970 Packages
971 GROUP COMPUTERS REMOVAL
972 Computers have been removed from group well
973 COMPUTERS ADDITION TO GROUP
974 computers inserted into cache
975 Add to group
976 INTERFACE LOCK ON REQUEST RESULT
977 Lock
978 You are going to lock all the interface on the search with criteria results
979 To come back to a standard state, you will have to click on the icon <span class='glyphicon glyphicon-lock'></span> which is at the right top of the interface
980 Packages on computers
981 Packages on servers groups
982 NO ASSIGNATION RULE IS AVAILABLE. NO REDISTRIBUTION POSSIBLE.
983 You have to choose on which type modifications has to perform
984 Modifications
985 COMPUTERS REMOVAL
986 REMOVE COMPUTERS FOR
987 This registry key already exists
988 YOU MUST FILL ALL THE FIELDS
989 THE DATA DOESN'T EXIST. THE STATES HOURS CAN NOT BE FOUND IN DATABASE FOR THIS PACKAGE
990 Packages created manually
991 Packages created automatically
992 Teledeploy time estimate
993 Red fields are in error
994 PDA/SMARTPHONE
995 Login
996 Last name
997 You must fill user ID
998 choose a valid profile
999 This user ID already exists
1000 Notified
1001 Red fields are in errors!
1002 Estimated time for deploy
1003 Redistribution servers packages parameters
1004 Can't create the packages directory (/var/lib/ocsinventory-reports/download/).
1005 Package creation is therefore not possible.
1006 don't have writing permissions
1007 The directory
1008 Use on this redistribution package
1009 Path on remote server
1010 NORMAL
1011 DEBUG
1012 LANGUAGE
1013 MAINTENANCE
1014 Switch to
1015 User mode
1016 Login ROOT
1017 Password ROOT
1018 (Don't write anything if you want use anonymous connection)
1019 Lock result
1020 Name of the tag information
1021 Teledeploy admin
1022 TAG admin
1023 Packages assign with status
1024 will be deleted
1025 Unaffect
1026 Packages deleted on computers
1027 Categories
1028 New
1029 Ignored
1030 Unchanged
1031 workflow for Teledeploy
1032 Activate workflow for Teledeploy
1033 Requester Information
1034 General Information Package
1035 Technical Information Package
1036 Validation information
1037 Package Name
1038 Requester
1039 Priority
1040 User notified
1041 User can defer
1042 triggers a reboot
1043 Stock control to validate the installation
1044 By list
1045 By visual
1046 Statut
1047 INFO
1048 Add file
1049 BAD ACTION
1050 Software search
1051 Search
1052 History
1053 Demande modifiee
1054 Demande effectuee
1055 Your e-mail is not valid
1056 Contact your OCS-NG administrator
1057 Failed to connect to the mailserver
1058 no e-mail is valid
1059 Data available
1060 New data
1061 Tab
1062 Field
1063 Wording
1064 Mandatory
1065 Field restraint
1066 Linked to a status
1067 Field name is already used
1068 The name of the field can not be empty
1069 Adding value done
1070 New Field
1071 Field Type
1072 Pending requests
1073 Make a request
1074 'Workflow' function is not activated.
1075 Activate this functionality to use it
1076 ERROR: SEARCH STATUS IS NOT DEFINED
1077 Status for creating package
1078 Test status
1079 restraint perimeter status
1080 global perimeter status
1081 Information by mail
1082 Workflow admin group
1083 Perimeter identification
1084 Group name for test
1085 Group name for restraint perimeter
1086 TAG value for test
Value of the test tag
1088 TAG value for restraint perimeter
1089 No status is active. Start by activating one
1090 has modify request n°
1091 A new request has been posted
1092 post a new request
1093 Database is incomplete
1094 Please replay the complete installation of the database
1095 Status Admin
1096 Fields list
1097 Tabs list
1098 Field name
1099 Default value
1100 Status list
1101 This field can't be updated
1102 Active status
1103 Status ID
1104 Level
1105 Workflow functionality is enabled
1106 It is possible to create a package only if a request exist before
1107 And the status is correct
1108 LDAP configuration
1109 Filter
1110 The assignment of a package depends on the status of the request
1111 First LDAP filter that will be used for evaluating the security level of a LDAP user (blank for none)
1112 Value of the first  attribute that will be used for evaluating the security level of a LDAP user (blank for none)
1113 If the user is found with the first filter, set this user role automatically
1114 Second LDAP filter that will be used for evaluating the security level of a LDAP user (blank for none)
1115 Value of the second attribute that will be used for evaluating the security level of a LDAP user (blank for none)
1116 If the user is found with the second filter, set this user role automatically
1117 E-mail
1118 Edit
1119 Select
1120 Count
1121 Update done
1122 Wiki
1123 IRC
1124 Forums
1125 Percentage
1126 Date of note
1127 Author of note
1128 Notes
1129 REMOVED PACKAGE
1130 Language editor
1131 Word
1132 ID word
1133 New word
1134 No ipdiscover data
1135 computer(s) already exist in redistribution group
1136 SNMP
1137 Enable/Disable the snmp service
1138 Show all subnets
1139 Network scan
1140 Administer subnet
1141 Subnet added
1142 Enter a new subnet for blacklist
1143 Subnet mask
1144 Invalid MAC address. (must be: XX.XX.XX.XX.XX.XX)
1145 the value must be between
1146 Administer profiles
1147 You can't update it.
1148 <b>WARNING:</b> No automatic backup of configuration files will be possible
1149 Name of new profile
1150 Reference profile
1151 Text profile
1152 WARNING: delete basic profiles may cause instability in OCS-NG
1153 Profile name
1154 On computers
1155 On teledeploy's workflow
1156 Manage teledeploy's workflow
1157 On the fields of teledeploy's workflow
1158 On package activation
1159 On MAC addresses
1160 On serial numbers
1161 On the ipdiscover's subnet
1162 Manage teledeploy
1163 Update Configuration
1164 Manage groups
1165 Manage console
1166 See warning messages of the GUI
1167 Manage accounts info
1168 may change accounts info computers
1169 may change their membership group
1170 Manage profiles
1171 Manage profiles group
1172 Manage ipdiscover
1173 Profile information
1174 User Pages
1175 Restrictions
1176 Rights to Blacklist
1177 Rights to Manage
1178 This field
1179 is a variable. It can not contain special characters
1180 can't be empty
1181 Redistribution server functionality
1182 You can't manage redistribution rules, this functionality is disabled
1183 List of packages to create
1184 Key added
1185 Key updated
1186 Your data is updated
1187 Configuration is pending
1188 This group is declared as a TEST perimeter
1189 This group is declared as a RESTRAINT perimeter
1190 You can't assign packages higher level
1191 Information: the configuration of workflow is currently on
1192 Group may receive TEST packets
1193 Group may receive RESTRAINT packets
1194 Only packets at a higher level
1195 may be assigned
1196 Profile
1197 SNMP functionality
1198 Networks scans
1199 Version of SNMP communities
1200 Value is updated
1201 Display
1202 Linux (ALL)
1203 Windows (ALL)
1204 IpDiscover
1205 Manage SNMP communities
1206 Directory of SNMP communities file
1207 Add community
1208 Community added
1209 Community updated
1210 Account info :
1211 URL where SNMP community file is
1212 Community deleted
1213 Separator of export file
1214 Configure engine to update snmp inventory regarding to snmp_laststate table (lower DB backend load)
1215 Blade server
1216 Firewall
1217 Load balancer
1218 Switch(es)
1219 Cards
1220 Cartridges
1221 Drives
1222 Fans
1223 Power supplies
1224 Trays
1225 Maximum capacity
1226 Color
1227 Contact
1228 Device SNMP
1229 Firmware
1230 Volume Name
1231 The file format must be ZIP
1232 The file format must be TAR.GZ
1233 Name of Database
1234 Description can't be empty
1235 Reference
1236 Soft version
1237 Firmware version
1238 Installation date
1239 MHz
1240 MB
1241 Number of SNMP devices
1242 m/d/Y H:i
1243 Only ocsagent.exe, OCS-NG-Windows-Agent-Setup.exe and ocspackage.exe files can be post
1244 This file can't be empty
1245 Manage your OCS-NG clients
1246 Assign again
1247 Architecture
1248 Folder
1249 Activation of cache tables (allows less solicit the MySQL database)
1250 Teledeploy speed
1251 Statistics
1252 Configuration profiles files directory
1253 Directory of old conf profiles files
1254 Directory of scripts logs
1255 Connection number by day
1256 Bad connection number by day
1257 Use flash on GUI
1258 Manual Entry
1259 For one week
1260 For one months
1261 Clear cache
1262 No plugin enabled for your profile
1263 SECURITY ALERT!
1264 Next
1265 Enable cache tables
1266 Virtual Machines
1267 Type of Virtual Machines
1268 Uuid
1269 Machine hosted by
1270 mm/dd/yyyy hh:ii
1271 Computers of the subnet
1272 Delete his computers
1273 You do not have the right to remove a machine
1274 Profile updated
1275 Profiles can't be deleted.
1276 Profile created
1277 Default profile (blank for none)
1278 You are not allowed to connect
1279 WOL
1280 Wake On Lan
1281 On Wake On Lan
1282 Wake On Lan order sent
1283 Do you want a Wake On Lan on this computer
1284 Source IP
1292 Use the advanced options of teledeploy
1293 Teledeploy force
1294 Installation time
1295 Installation date/time
1296 OCS Professional
1297 SNMP device identification
1298 QRCode administration
1299 QRCode
1300 Check QRCode
1301 on invisible packages
1302 development
1303 Export
1304 XML
1305 On the generation of an XML inventory
1306 Manage plugins
1307 Active Plugins
1308 Add plugins
1309 Teledeploy options
1310 Shutdown
1311 Reboot
1312 Data width
1313 Current address width
1314 Logical CPUS
1315 Current speed
1316 Socket type
1317 Cores number
1318 L2 cache size
1319 Voltage
1320 Use , between data
1321 No port defined for WOL
1322 Unable to open socket for WOL
1323 Server printer sharing
1324 Sharing printer on server
1325 Screen horizontal / vertical
1326 Shared
1327 Local / Networks
1328 Manage
1329 Administration
1330 Hardware
1331 Devices
1332 Miscellaneous
1333 Configuration
1334 No data available in table
1335 Showing _START_ to _END_ of _TOTAL_ entries
1336 Showing 0 to 0 of 0 entries
1337 (filtered from _MAX_ total entries)
1338 Show _MENU_ entries
1339 Loading...
1340 Processing...
1341 Search&nbsp;:&nbsp;
1342 No matching records found
1343 First
1344 Last
1345 Next
1346 Previous
1347 activate to sort column ascending
1348 activate to sort column descending
1349 Show / Hide
1350 ,
1351 .
1352 Server understood the request but request content was invalid
1353 Unauthorised access
1354 Forbidden ressource can't be accessed
1355 Page not found
1356 Request-URI Too Long, try to clean Cookies
1357 Internal Server Error
1358 Service Unavailable
1359 User Logged Out
1360 Server information
1361 My account
1362 About
1363 OK
1364 Cancel
1365 My account
1366 First name
1367 Network
1368 CPU
1369 PHP Version
1370 Web Server
1371 Database Server
1372 Kernel
1373 Distribution
1374 Access the website
1375 Old Forums
1376 Q&A
1377 Question and answers
1378 Free RAM
1379 RAM installed
1380 Reset table columns
1381 Actions
1382 BIOS Motherboard Serial
1383 Motherboard Manufacturer
1384 Motherboard Model
1385 Update user
1386 Create user
1387 System
1388 Network
1389 Hardware
1390 Agent
1391 This field is mandatory
1392 Invalid value
1393 This package name already exists
1394 This field should only contain numbers and alphanumeric characters
1395 A profile with this name already exists. Please pick a new one
1396 Identifier (ex: admin)
1397 Display name (ex: Administrators)
1398 Copy profile data
1399 Create profile
1400 Users
1401 Profiles
1402 Identifier
1403 Create user
1404 Some errors were found while validating the profile
1405 The profile was successfully created
1406 An error occurred while trying to create the profile, please check the filesystem or contact an administrator
1407 The profile file is not writable
1408 The profile was successfully updated
1409 An error occurred while trying to update the profile, please check the filesystem or contact an administrator
1410 Users
1411 Display name
1412 Edit profile
1413 New label
1414 Machine's Details
1415 OperatorID
1416 OperatorName
1417 IMEI/DEVICEID
1418 Country
1419 Search in column
1420 Theme customization
1421 Repository
1422 Expire
1423 File name
1424 Mirrors
1425 Tag
1426 Updated
1427 Base URL
1428 Bateria
1429 Sim card
1430 Equal
1431 More than
1432 Less than
1433 Hardware Link Id
1434 User Id
1435 Location
1436 Process
1437 Chemistry
1438 SBDS Version
1439 Max error
1440 OEM Specific
1441 Revalidate time
1442 XML Definition
1443 Default Gateway
1444 USB Devices
1445 Group
1446 Model name
1447 Account info
1448 Is null
1449 General configuration
1450 ID
1451 Static?
1452 Warranty begin
1453 GUID
1454 Source
1455 Virtual interface
1456 Phone number
1457 Link Ipdiscover network to computer TAG</br><b style="color:#d9534f;">Logout / Login after updating this configuration</b>
1458 characters

1459 Time delay between each CVE scan
1460 CVE-search management
1461 Enable CVE Reporting
1462 URL of the cve-search host to use for the reporting
1463 CVE Reporting
1464 CVE Reporting is not enabled.
1465 By CVSS
1466 Please, see the documentation to configure CVE Reporting : <a href="http://wiki.ocsinventory-ng.org/04.Management-console-and-its-advanced-features/CVE-Search-management/"> Managing CVE-search reporting </a>
1467 Link
1468 Vulnerability score between
1469 Select software categories that you do not want to process
1470 Enable CVE-search verbose
1471 Enable to get CVE corresponding to all software version
1472 CVE Inventory
1473 New matching regex
1474 Match list
1475 Name or Regex
1476 Publisher result
1477 Name result
1478 Or import CSV file
1479 Import
1480 Download CSV file example
1481 CVE history
1482 Latest execution date
1483 CVE count
1484 Time of validity of a CVE after OCS Inventory scan
1485 By software
1486 By computer
1487 Authentication has been blocked due to too many failed attempts. (%time% seconds remaining)
1488 Enable authentication security
1489 Number of attempts
1490 Cooldown
1491 Enable password security
1492 Set minimal characters in password
1493 Force number in password
1494 Force uppercase in password
1495 Force special characters in password
1496 The password must contain at least
1497 The password must contain at least one uppercase
1498 The password must contain at least one number
1499 The password must contain at least one special character

1500 Software category
1501 New category
1502 List of categories
1503 Add software
1504 Regular expression or Software name
1505 Select default category for software
1506 No category created
1507 Software version
1508 Software vendor
1509 Advanced settings
1510 Software version comparator
1511 Version comparator
1512 Less or Equal
1513 More or Equal
1514 Category
1515 All OS
1516 All software (but default)
1517 No category have been selected
1518 List of regex
1519 Missing computers :
1520 (CSV datas are imported)
1521 Display count softwares

1550 Do you really want to archive 
1551 Archive
1552 Restore
1553 Do you really want to restore 
1554 ARCHIVED COMPUTERS
1555 ACTIVE COMPUTERS
1556 Archive / Restore
1557 ALL COMPUTERS
1558 Archives

1560 Purge old IPDiscover data
1561 Validity time (in days) of an IPDiscover data

1600 My dashboard
1601 Dynamic groups
1602 Doesn't contain
1603 More than X days
1604 Less than X days
1605 Others
1606 Is not empty

1700 Advanced configuration
1701 Tab available
1702 New tab
1703 Add selected packages

1800 Química
1801 Ciclos
1802 Descrição
1803 Capacidade de projeto
1804 Tensão de projeto
1805 Carga estimada restante
1806 Fabricante
1807 Nome
1808 Número de série
1809 Status

2000 * SETUP voices 2000-2200 * (2000-2029 Common voices *** 2030-2200 Setup voices)
2001 ERROR:
2002 ERROR: line
2003 MySQL error:
2004 (using new ocs account)
2005 Subnet
2006 WARNING:
2007 account
2008 error
2009 failed
2010 host
2011 login
2012 not inserted
2013 needed
2014 password
2015 query
2016 successful
2017 using
2018 was imported
2019 were already imported
2020 Your install.php exists in your installation directory (by default : /usr/share/ocsinventory-reports/ocsreports).
2021 Your logs directory (by default : /var/lib/ocsinventory-reports/logs) is not writable
2022 You can't send a file larger than
2023 Delete it
2024 The default SQL login/password is set on your database:
2025 Change your login password for 'ocs' user in MySQL
2026 The default login/password is activate on OCS-NG GUI
2027 Change your 'admin' password on OCS-NG GUI
2028 Authentication key
2029 The config directory is not writable

2030 OCS-NG Inventory Installation
2031 Current installed version
2032 is lower than this version
2033 Automatic install launched.
2034 DB configuration not completed. Automatic install launched
2035 ERROR: Sessions for PHP is not properly installed.<br>Try installing the php-session package.
2036 WARNING: XML for PHP is not properly installed, you will not be able to use ipdiscover-util.
2037 ERROR: MySQL for PHP is not properly installed.<br>Try installing MySQL for php package (Debian: php5-mysql)
2038 WARNING: GD for PHP is not properly installed.<br>You will not be able to see any graphical display<br>Try uncommenting extension=php_gd2.dll (Windows) by removing the semicolon in file php.ini, or try installing the php5-gd package (Linux).
2039 WARNING: OpenSSL for PHP is not properly installed.<br>Some automatic deployment features won't be available<br>Try uncommenting extension=php_openssl.dll (Windows) by removing the semicolon in file php.ini, or try installing the php-openssl package (Linux).
2040 WARNING: You will not be able to build any deployment package with size greater than
2041 You must raise both <font color="red">post_max_size</font> and <font color="red">upload_max_filesize</font> in your vhost configuration to increase this limit.
2042 WARNING: your the default root password is set on your MySQL server. Change it asap. (using root password=blank)
2043 WARNING: The user you typed does not seem to be root<br>If you encounter any problem with files insertion, try setting the global <font color="red">max_allowed_packet</font> MySQL value to at least 2MB in your server config file.
2044 Label added
2045 Label NOT added (not tag will be asked on client launch)
2046 ERROR: MySQL authentication problem.
2047 You must add the 'old-passwords' in your MySQL configuration file (my.ini). Then restart MySQL, and relaunch install.php
2050 Installation finished you can log in index.php with login=admin and password=admin
2051 Click here to enter OCS-NG GUI
2052 ERROR: can't write in directory (on dbconfig.inc.php), please set the required rights in order to install ocsinventory (you should remove the write mode after the installation is successful)
2053 Please wait, database update may take up to 30 minutes...
2054 failed, KEY was too long<br>You need to redo this query later or you will experience severe performance issues.
2055 Database successfully generated
2056 MySQL config file successfully written
2057 Existing database updated
2058 Database engine checking...
2059 ERROR: Alter query failed
2060 ERROR: Show table status query failed
2061 ERROR: InnoDB conversion failed, install InnoDB MySQL engine support on your server<br>or you will experience severe performance issues.<br>(Try to uncomment skip-innodb in your MySQL config file.)<br>Reinstall when corrected.
2062 ERROR: HEAP conversion failed, install HEAP MySQL engine support on your server<br>or you will experience severe performance issues.
2063 Database engine successfully updated
2064 table(s) altered
2065 ERROR: The installer ended unsuccessfully, rerun install.php once problems are corrected
2066 WARNING: 'files' directory missing, can't import
2067 from it
2068 was not inserted. You need to set the max_allowed_packet MySQL value to at least 2MB
2070 missing, if you do not reinstall the DEPLOY feature won't be available
2071 WARNING: One or more files were already inserted
2072 Deploy files successfully inserted
2073 Table 'files' truncated
2074 Table 'files' was empty
2076 No subnet.csv file to import
2077 Inserting subnet.csv networks
2078 ERROR: Could not insert network
2079 in the subnet table, error
2080 WARNING: Network
2081 was not inserted (invalid ip or mask
2082 Network netid computing. Please wait...
2083 ERROR: Could not update netid to
2084 Network netid was computed
2085 were already computed
2086 were not computable
2087 Netmap netid computing. Please wait...
2089 Netmap netid was computed
2090 Cleaning orphans...
2091 ERROR: Could not clean
2092 orphan lines deleted
2093 Cleaning netmap...
2094 ERROR: Could not clean netmap
2095 netmap lines deleted
2096 Please enter the label of the windows client tag input box:
2097 Leave empty if you don't want a popup to be shown on each agent launch
2098 ERROR: ZIP for PHP is not properly installed.<br>Try to uncomment extension=php_zip.dll (Windows) by removing the semicolon in file php.ini, or try to install the libphp-pclzip package (Linux).
2099 ERROR: this MySQL login doesn't have the rights to create the database
2100 Update old account info
2101 Add by script
2102 WARNING: If you change default database name (ocsweb) or user (ocs), don't forget to update the file 'z-ocsinventory-server.conf' in your Apache configuration directory
2103 DEMO mode: you can't update data
2104 YOU ARE WATCHING THE DEMO VERSION OF
2105 Your database is OK.<br>No action taken.
2106 in MySQL configuration, the variable 'max_allowed_packet' allows only file size <
2107 The version of WEB interface is lower than the version of the database
2108 The version of the database <b> MUST </b> be less than or equal to the version of the web interface
2109 Current version
2110 Expected version
2111 Perform the update
2112 The following file is not present or is not readable
2113 Your PHP installation is older than version 5.4 and will not be compatible with incoming versions (version&nbsp;:&nbsp;
2114 No sql file found for version
2115 The user you typed does not seem to be root
2116 The config/profiles directory is not writable
2117 Display an update message if a new version is available
2118 OCSInventory
2119 is available
2120 Click here to download
2121 Launch inventory on agent service startup (Windows)
2122 Edit
2123 Available packages
2124 Deleted packages
2125 WARNING: CURL for PHP is not properly installed. Try installing the php-curl package (Linux).
2126 Assets categorization
2127 The current multi search query will be used as an asset categorization criteria.
2128 Are you sure?
2129 Back to multi search
2130 Assets categories
2131 Number of machines per category
2132 Assets category
2133 You haven't created an asset category
2134 You haven't created a software category
2135 No machine has been inventoried
2136 Update
2137 Choose a new file if you want to modify the old one
2138 Save my search
2139 The current multi search query will be saved. You will be able to retrieve your saved searches on <i><b>Manage > Saved search</b></i> or using <i><b>Use a saved search</b></i> on multi search.
2140 Use a saved search
2141 Saved searches
2142 Create a search
2143 Search was successfully saved
2144 Update an existing saved search
2145 Who can see ?
2146 Only me
2147 My group
2148 All users
2149 Update date when peripherals updated

5000 [DEBUG]computers insertions request =>[DEBUG]
5001 [DEBUG]REQUEST MADE => [DEBUG]
5002 [DEBUG] => weight: [DEBUG]
5003 [DEBUG]Rache regeneration[DEBUG]
5004 [DEBUG]forcing cache limit old value[DEBUG]
5005 [DEBUG]Cache total use[DEBUG]
5006 [DEBUG]array count request[DEBUG]
5007 [DEBUG]Cache use for lines number[DEBUG]
5008 [DEBUG]array request[DEBUG]
5009 [DEBUG]RAW DATAS[DEBUG]
5010 [DEBUG]table field=[DEBUG]
5011 [DEBUG]Comparison field=[DEBUG]
5012 [DEBUG]value to search=[DEBUG]
5013 [DEBUG]Complementary field=[DEBUG]
5014 [DEBUG]AND OR Field=[DEBUG]
5015 [DEBUG]COMPLEMENTARY FIELD OMISSION ON TABLE[DEBUG]
5016 [DEBUG]table =>[DEBUG]
5017 [DEBUG]filed =>[DEBUG]
5018 [DEBUG]comparison =>[DEBUG]
5019 [DEBUG]value to search  =>[DEBUG]
5020 [DEBUG]complementary field =>[DEBUG]
5021 [DEBUG]AND_OR =>[DEBUG]
5022 [DEBUG]NORMAL CONDITION REQUEST[DEBUG]
5023 [DEBUG]DIFF CONDITION REQUEST[DEBUG]

6000 Plugins
6001 Select columns to show / hide
6003 Plugin
6004 Total available
6005 Power on/off
6007 Please install the following modules in order to get this feature working&nbsp;:&nbsp;
6008 Can't write in the following directory&nbsp;:&nbsp;
6009 You can't install plugins, check error messages above.
6010 The communication server encountered the following error on install&nbsp;:&nbsp;
6011 Click here to solve your problem
6012 Select All

7000 Extensions
7001 Extensions manager
7002 Extension's name
7003 Version
7004 License
7005 Author
7006 Last updated
7007 Are you sure you want to delete this plugin
7008 Extension Install
7009 Installed Extensions
7010 This extension has been already installed
7011 is an invalid extension, check your sources.
7012 Installation aborted!
7013 installed
7014 There is currently no extensions available for installation
7015 Select at least one computer!
7016 MTU
7017 Extension successfully installed! <br> Please, logout and re-log to finish the console installation. <br> You may need to update profiles permissions to access the extension page. 
7018 This extension is already installed.
7019 A PHP error occurred.
7020 Extension successfully uninstalled!
7021 Extension "%s" not compliant
7022 Missing function "%s" in "%s"!
7023 Unable to include install.php

8000 Notifications
8001 Enable notification tracking
8002 Administrator's email address
8003 Administrator's name
8004 Reply email address
8005 Reply name
8006 Host SMTP
8007 SMTP identifier
8008 SMTP password
8009 Email send mode
8010 (Optional)
8011 Configuration
8012 Customize template
8013 Here is the default OCS Inventory summary, it contains a report of the software categories and assets categories :
8014 Successful upload
8015 Failed upload
8016 Here you can download your customized notification template:</br>• The file must be an html file.</br></br>Information:</br>• To get translation put {{g.(number of translation)}} in your html code- Example: {{g.49}} = Name</br>• For the moment you have two choices of report inventory: </br> {{Report.Software}} - Number of software per software category </br> {{Report.Asset}} - Number of machines per asset category
8017 This file is not an html file
8018 Subject
8019 Notification OCSInventory
8020 WARNING : Mail template file not found
8021 The uploaded file need to have .html extension to be valid
8022 See news
8023 ... Read more
8024 Close news
8025 Back to the news menu
8026 Enable OCS Inventory News on dashboard
8027 A problem of OCS news data recovery has occurred
8028 You have recent news
8029 is not writable

8100 Web application Inventory
8101 Web application list
8102 Add Web application
8103 Associated DNS
8104 Entry
8105 Data
8106 Time to live
8107 This Web application already exists
8108 Enable Web application Inventory

8200 Schedule a Wake On Lan
8201 Save
8202 WOL date/time
8203 WOL saved!

9000 SNMP configuration
9001 Create type
9002 Type configuration
9003 Create label
9004 OID
9005 OID string value
9006 Label name
9007 <b>The name is unique and must not contain any special characters except underscore.</b></br>Please don't use MySQL keywords or reserved words, refer to : <a href="https://dev.mysql.com/doc/refman/8.0/en/keywords.html">MySQL Keywords</a>
9008 Add MIB file
9009 Put the MIB file on your server MIBs directory. <br> Don't forget to set your MIBs directory path in <b>Configuration > General configuration > SNMP</b>
9010 Server SNMP MIBs directory
9011 Filter by type :
9012 SNMP details
9013 Show details
9014 SNMP configuration is empty. Check the documentation to know how to configure SNMP : <a href="http://wiki.ocsinventory-ng.org/06.Network-Discovery-with-OCS-Inventory-NG/Managing-and-using-SNMP-feature/">Managing SNMP on Web Console</a>
9015 Use for reconciliation
9016 Select the type that you want to configure.
9017 Numeric OID
9018 Inventory field name
9019 OID name string
9020 Add to SNMP Model
9021 Search for specific row
9022 Can't create type with empty OID or empty OID string value
9023 Type name already exists
9024 An error happened during the SNMP type creation
9025 Label already exists
9026 An error happened during the SNMP label creation
9027 An error happened during the SNMP configuration
9028 An error happened during the type deletion
9029 An error happened during the label deletion
9030 An error happened during the config deletion
9031 Type conditions
9032 Wildcards: * (several characters at the OID string value beginning or at the OID string value ending )
9033 Authentication Protocol
9034 Privacy Protocol
9035 Privacy Password
9036 No OID found
9037 Equipment contacted today
9038 Number of equipment per type
9039 Quick view
9040 Export all SNMP types

9100 SSL key path
9101 SSL certificate path
9102 Enable SSL
9103 SSL mode
9104 CA certificate path
9105 MySQL Port
9106 Default download protocol

9200 Package deployment for computer
9201 Package deployment for selection
9202 Package deployment for group
9203 Activate download fragmentation
9204 Configure download fragmentation ratio
9205 Enable auto activation package
9206 Activated
9207 Deployment date
9208 Awaiting deployment

9300 Interactions
9301 Options
9302 Resume
9303 Linux
9304 MacOS
9305 Windows
9306 Powershell script
9307 Scripts
9308 Install / Uninstall
9309 Others

9310 Batch script
9311 Custom package
9312 Execute an exe
9313 Install MSI application
9314 Powershell script
9315 Store file/folder 
9316 Uninstall application
9317 Update Agent
9318 Install with WinGet (Powershell)

9319 Install application
9320 Uninstall application
9321 Add apt repository
9322 Add yum repository
9323 Bash / sh script

9324 Install .app application
9325 Install .pkg application
9326 Install with brew
9327 Apple script

9328 Install plugin

9340 Script
9341 MSI file
9342 Repository URL
9343 .app file
9344 .pkg file
9345 HTTP
9346 HTTPS
9347 Arguments (optional)
9348 Packager file
9349 Application name
9350 Application identifier
9351 How to find wmic application identifier : open a cmd as administrator and run "wmic product get name"
9352 EXE file
9353 Script file
9354 Write your script here <b>OR</b> put your script file
9355 Put your packager file with all parameters inside
9356 If multiple files, please zip before
9357 Packager type
9358 apt
9359 yum
9360 dnf
9361 Reload build
9362 File
9363 Plugin agent file
9364 Configuration line
9365 Line to be added to modules.conf file (e.g. 'use Ocsinventory::Agent::Modules::Pluginname;'):
9366 Path to Modules directory
9367 Setting the below option to EXECUTE will cause the package to fail if the exit code is not 0. Setting it to LAUNCH will return the exit code to the server, along with the package status.
9368 Execution mode : 
9369 LAUNCH
9370 EXECUTE

9500 Merge selected duplicates
9501 Merge all duplicates
9502 Duplicates by :

9600 CSV reconciliation field :
9601 OCS reconciliation field :
9602 Empty value
9603 No corresponding device found in OCS database
9604 Update failed
9605 Admin data was imported from CSV, see below for any errors
9606 CSV can not be read, please check separator configuration in OCS general configuration
9607 CSV uploaded successfully
9608 The CSV reconciliation field must allow the identification of each machine and must correspond to a field already present in the OCS database (machine name or serial number)
9609 OCS reconciliation field must correspond to the CSV field chose previously 
9610 Please select corresponding fields :
9611 Directory for temporary files
9612 Import from CSV
9613 Failed to import CSV, please check temporary files directory configuration in OCS general configuration
9614 Import error. Only CSV files are accepted
9615 Failed to import data

9650 Number of LDAP filters (minimum 1, maximum equals number of profiles)

9651 History
9653 User name
9654 Date and time
9655 Action
9656 Target of action

9700 CAS server port, e.g. : 443
9701 CAS server uri, e.g : /cas
9702 CAS server host, e.g. : authentication.org
9703 CAS default role, applied on first connection initiated using CAS authentication
9704 CAS Configuration

9800 Exclude archived computers from statistics, CVE inventory, all softwares count, computers per TAG count
9801 Show bios diagram in dashboard

9802 Show CVE search links

9900 Layouts
9901 Layout created
9902 Layout deleted
9903 Error creating layout
9904 Please check your input. Repeat the process if the problem persists.
9905 Error deleting layout
9906 A layout with the same name or columns already exists for your user/scope, please choose another name or set of columns
9907 Manage layouts
9908 Show all layouts
9909 Add new layout
9910 Available layouts :
9911 Layout name
9912 Layout description
9913 Table name
9914 Creator
9915 Visibility scope 
9916 Failed updating layout, please check that another layout with the same name and visibility doesn\'t exist
9917 Public
9918 Group
9919 Personal
9920 Layout updated successfully
9921 Is allowed to manage layouts

9930 DNS

9940 Is allowed to manage saved searches

9950 Notifications
9951 Please check that the notification configuration has been set correctly, otherwise sending reports through notifications will not work
9952 Report notification created successfully
9953 Report notification updated successfully
9954 Please set a recurrence
9955 Please provide at least one recipient, or comma separated recipients
9956 daily
9957 weekly
9958 monthly
9959 Activate : 
9960 Report recurrence : 
9961 Recipient(s) : 
9962 Day of reccurence : 
9963 End Date :

9970 You are not allowed to modify this user
9971 Do you really want to re-affect the package 
9972 Affect again

9980 Network Scans
9981 Scan method used for IpDiscover scans performed by agents (nmap, ICMP, ARP scan)<br><br> Note : ARP scan will only scan the local network
9982 Scan method used for SNMP scans performed by Linux agents (nmap, ICMP, ARP scan)<br><br> Note : ARP scan will only scan the local network
9983 If ARP scan is selected: bandwidth used by ARP scan (in Kbps)
9984 Export SNMP Configuration
9985 Download SNMP Communities Configuration
9986 Download SNMP Types Configuration
9987 Configuration Export for Local SNMP Scanning: The configuration will be downloaded as an XML file that can be used to set up an agent for local SNMP scanning.<br> Please note that the SNMP scans configuration will retrieve the general configuration of network scans if exported from here. If you want per group or per device configuration, head to the group or device page and access the configuration.
9988 Configuration export
9989 Download SNMP Scan Configuration
9990 Download SNMP Subnets List
9991 Generate SNMP files